Blade Network Technologies RACKSWITCH G8124 Guide d'installation télécharger pdf (Page 31)

RackSwitch G8124 Installation Guide

BPP-00018-01, December 2009 Chapter 2: Installing the RackSwitch G8124

 31

3. The rear mounting brackets are secured to the rack with M6 screws, washers, and clip nuts. Torque

the screws to approximately 30 inch-pounds (3.5 Nm).

Figure 12 Attaching Rear Mounting Brackets

4. The front mounting brackets and the rear mounting brackets are secured with M3 screws. Torque

the screws to approximately 4 inch-pounds (0.5 Nm).

Figure 13 Securing the Rear Bracket to the Front Bracket

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Pas de commentaire

Blade Network Technologies RACKSWITCH G8124 Guide d'installation Page 31