Blade Network Technologies BLADEOS G8124 Manuel de service

2350 Mission College Blvd.Suite 600Santa Clara, CA 95054www.bladenetwork.netBLADE OS™Command ReferenceRackSwitch™ G8124Version 5.0Part Number: BMD0014

BLADE OS 5.0 Command Reference10  Contents BMD00142, November 2009Operations-Level VRRP Options  312System Operations  312Chapter 8: The Boot

BLADE OS 5.0 Command Reference100  Chapter 4: The Information Menu BMD00142, November 2009/info/qosQuality of Service Information Menu/info/qos/802

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  101The following table describes the IEEE 802.1p priority to

BLADE OS 5.0 Command Reference102  Chapter 4: The Information Menu BMD00142, November 2009/info/aclAccess Control List Information Menu/info/acl/ac

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  103Access Control List (ACL) information includes configurat

BLADE OS 5.0 Command Reference104  Chapter 4: The Information Menu BMD00142, November 2009/info/linkLink Status Information Use this command to

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  105/info/port Port InformationPort information includes: Po

BLADE OS 5.0 Command Reference106  Chapter 4: The Information Menu BMD00142, November 2009/info/transcvrPort Transceiver Status This command displ

BMD00142, November 2009 107CHAPTER 5The Statistics MenuYou can view switch performance statistics in both the user and administrator command modes. Th

BLADE OS 5.0 Command Reference108  Chapter 5: The Statistics Menu BMD00142, November 2009l3Displays the Layer 3 Stats menu. To view menu options, s

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  109/stats/port <port alias or number>Port Statistics Me

BMD00142, November 2009 11PrefaceThe BLADE OS 5.0 Command Reference describes how to configure and use the BLADE OS 5.0 software with your RackSwitch

BLADE OS 5.0 Command Reference110  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/port <port alias or number>/brgBridging Stati

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  111/stats/port <port alias or number>/etherEthernet Sta

BLADE OS 5.0 Command Reference112  Chapter 5: The Statistics Menu BMD00142, November 2009dot3StatsSingleCollisionFramesA count of successfully tran

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  113dot3StatsFrameTooLongsA count of frames received on a part

BLADE OS 5.0 Command Reference114  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/port <port alias or number>/ifInterface Stati

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  115ifInErrors For packet-oriented interfaces, the number of i

BLADE OS 5.0 Command Reference116  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/port <port alias or number>/ipInterface Proto

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  117/stats/l2Layer 2 Statistics MenuThe Layer 2 statistics pro

BLADE OS 5.0 Command Reference118  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/l2/fdb [clear]FDB StatisticsThis option displays st

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  119/stats/l2/lacp [<port alias or number>|clear]LACP St

BLADE OS 5.0 Command Reference12  Preface BMD00142, November 2009Chapter 7, “The Operations Menu,” shows how to use commands which affect switch pe

BLADE OS 5.0 Command Reference120  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/l2/hotlinkHotlinks StatisticsThe following table de

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  121/stats/l3Layer 3 Statistics MenuThe Layer 3 statistics pro

BLADE OS 5.0 Command Reference122  Chapter 5: The Statistics Menu BMD00142, November 2009icmp [clear]Displays ICMP statistics. See page 127 for sam

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  123/stats/l3/ipIPv4 Statistics ospfclearClears Open Shortest

BLADE OS 5.0 Command Reference124  Chapter 5: The Statistics Menu BMD00142, November 2009ipInDiscards The number of input IP datagrams for which no

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  125/stats/l3/route [clear]Route StatisticsUse the clear optio

BLADE OS 5.0 Command Reference126  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/l3/dns [clear]DNS StatisticsThis option displays Do

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  127/stats/l3/icmp [clear]ICMP StatisticsICMP statistics:icmpI

BLADE OS 5.0 Command Reference128  Chapter 5: The Statistics Menu BMD00142, November 2009Use the clear option to delete all ICMP statistics.icmpInA

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  129/stats/l3/tcp [clear]TCP StatisticsTCP statistics:tcpRtoAl

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Preface  13Typographic ConventionsThe following table describes the typographic styles used i

BLADE OS 5.0 Command Reference130  Chapter 5: The Statistics Menu BMD00142, November 2009Use the clear option to delete all TCP statistics.tcpAttem

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  131/stats/l3/udp [clear]UDP StatisticsUse the clear option to

BLADE OS 5.0 Command Reference132  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/l3/igmp <VLAN number>IGMP Statistics This opt

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  133/stats/l3/ospfOSPF Statistics rxIgmpV3FilterChangeRecordsT

BLADE OS 5.0 Command Reference134  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/l3/ospf/generalOSPF General StatisticsThe OSPF Gene

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  135Table 62 OSPF General Statistics (stats/l3/ospf/general)

BLADE OS 5.0 Command Reference136  Chapter 5: The Statistics Menu BMD00142, November 2009n2way The sum total number of bidirectional communication

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  137Intf Change Stats:hello The sum total number of Hello pack

BLADE OS 5.0 Command Reference138  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/l3/vrrpVRRP StatisticsVirtual Router Redundancy Pro

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  139/stats/l3/ripRouting Information Protocol Statistics vrrpB

BLADE OS 5.0 Command Reference14  Preface BMD00142, November 2009How To Get HelpIf you need help, service, or technical assistance, call BLADE Netw

BLADE OS 5.0 Command Reference140  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/mpManagement Processor Statistics Menu[MP-specific

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  141/stats/mp/pktMP Packet Statistics Packet counts seen by M

BLADE OS 5.0 Command Reference142  Chapter 5: The Statistics Menu BMD00142, November 2009current Total number of packet allocations with size betwe

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  143/stats/mp/tcbTCP Statistics/stats/mp/ucbUCB StatisticsAll

BLADE OS 5.0 Command Reference144  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/mp/cpuCPU StatisticsThis option displays the CPU ut

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  145/stats/aclACL Statistics MenuACL statistics are described

BLADE OS 5.0 Command Reference146  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/snmp [clear]SNMP StatisticsNote – You can reset the

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  147snmpInASNParseErrs The total number of ASN.1 or BER errors

BLADE OS 5.0 Command Reference148  Chapter 5: The Statistics Menu BMD00142, November 2009snmpInTotalReqVars The total number of MIB objects which h

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  149snmpOutGetNexts The total number of SNMP Get-Next Protocol

BMD00142, November 2009 15CHAPTER 1The Command Line InterfaceYour RackSwitch G8124 is ready to perform basic switching functions right out of the box.

BLADE OS 5.0 Command Reference150  Chapter 5: The Statistics Menu BMD00142, November 2009/stats/ntpNTP StatisticsBLADE OS uses NTP (Network Timing

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 5: The Statistics Menu  151Note – Use the following command to delete all NTP statist

BLADE OS 5.0 Command Reference152  Chapter 5: The Statistics Menu BMD00142, November 2009

BMD00142, November 2009 153CHAPTER 6The Configuration MenuThis chapter discusses how to use the Command Line Interface (CLI) for making, viewing, and

BLADE OS 5.0 Command Reference154  Chapter 6: The Configuration Menu BMD00142, November 2009Each configuration option is briefly described in Table

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  155Viewing, Applying, and Saving ChangesAs you use the con

BLADE OS 5.0 Command Reference156  Chapter 6: The Configuration Menu BMD00142, November 2009To save the new configuration, enter the following comm

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  157/cfg/sysSystem Configuration MenuThis menu provides con

BLADE OS 5.0 Command Reference158  Chapter 6: The Configuration Menu BMD00142, November 2009radiusDisplays the RADIUS Authentication menu. To view

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  159dlight enable|disableDisables or enables daylight savin

BLADE OS 5.0 Command Reference16  Chapter 1: The Command Line Interface BMD00142, November 2009Connecting to the Switch via TelnetA Telnet connecti

BLADE OS 5.0 Command Reference160  Chapter 6: The Configuration Menu BMD00142, November 2009rstctrl disable|enableEnables or disables the reset con

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  161/cfg/sys/errdisSystem Error Disable and Recovery Config

BLADE OS 5.0 Command Reference162  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/syslogSystem Host Log Configuration [Syslog Me

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  163log <feature|all> <enable|disable>Displays

BLADE OS 5.0 Command Reference164  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/sshdSSH Server ConfigurationThis menu enables

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  165offDisables the SSH server.curDisplays the current SSH

BLADE OS 5.0 Command Reference166  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/radiusRADIUS Server Configuration [RADIUS Serv

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  167bckdoor disable|enableEnables or disables the RADIUS ba

BLADE OS 5.0 Command Reference168  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/tacacs+TACACS+ Server ConfigurationTACACS (Ter

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  169Table 77 TACACS+ Server Options Command Syntax and Us

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 1: The Command Line Interface  17The following SSH clients have been tested: OpenSSH

BLADE OS 5.0 Command Reference170  Chapter 6: The Configuration Menu BMD00142, November 2009secbd enable|disableEnables or disables TACACS+ secure

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  171/cfg/sys/ldapLDAP Server Configuration LDAP (Lightweigh

BLADE OS 5.0 Command Reference172  Chapter 6: The Configuration Menu BMD00142, November 2009bckdoor disable|enableEnables or disables the LDAP back

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  173/cfg/sys/ntpNTP Server Configuration This menu enables

BLADE OS 5.0 Command Reference174  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmpSystem SNMP ConfigurationBLADE OS support

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  175Table 80 System SNMP Options Command Syntax and Usage

BLADE OS 5.0 Command Reference176  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmp/snmpv3SNMPv3 Configuration SNMP version

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  177group <vacmSecurityToGroup number [1-16]>Maps the

BLADE OS 5.0 Command Reference178  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmp/snmpv3/usmUser Security Model Configurat

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  179delDeletes the selected USM user entries.curDisplays th

BLADE OS 5.0 Command Reference18  Chapter 1: The Command Line Interface BMD00142, November 2009 Administrators are the only ones that may make per

BLADE OS 5.0 Command Reference180  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmp/snmpv3/viewSNMPv3 View Configuration[SNM

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  181/cfg/sys/ssnmp/snmpv3/access <1-32>View-Based Acc

BLADE OS 5.0 Command Reference182  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmp/snmpv3/groupSNMPv3 Group Configuration d

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  183/cfg/sys/ssnmp/snmpv3/commSNMPv3 Community Table Config

BLADE OS 5.0 Command Reference184  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmp/snmpv3/taddrSNMPv3 Target Address Table

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  185/cfg/sys/ssnmp/snmpv3/tparamSNMPv3 Target Parameters Ta

BLADE OS 5.0 Command Reference186  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/ssnmp/snmpv3/notifySNMPv3 Notify Table Configu

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  187/cfg/sys/accessSystem Access Configuration[System Acces

BLADE OS 5.0 Command Reference188  Chapter 6: The Configuration Menu BMD00142, November 2009http disable|enableEnables or disables HTTP (Web) acces

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  189/cfg/sys/access/mgmtManagement Networks Configuration T

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 1: The Command Line Interface  19Setup vs. CLIOnce the administrator password is veri

BLADE OS 5.0 Command Reference190  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/access/userUser Access Control Configuration N

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  191/cfg/sys/access/user/uid <1-10>System User ID Con

BLADE OS 5.0 Command Reference192  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/access/user/strongpwStrong Password Configurat

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  193/cfg/sys/access/httpsHTTPS Access Configuration[https M

BLADE OS 5.0 Command Reference194  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/dstCustom Daylight Savings Time Configuration

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  195/cfg/sys/sflowsFlow Configuration sFlow is a sampling m

BLADE OS 5.0 Command Reference196  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/sys/sflow/port <port alias or number>sFlow P

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  197/cfg/port <port alias or number>Port Configuratio

BLADE OS 5.0 Command Reference198  Chapter 6: The Configuration Menu BMD00142, November 20098021ppri <0-7>Configures the port’s 802.1p priori

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  199Temporarily Disabling a PortTo temporarily disable a po

BLADE OS 5.0 Command Reference2 BMD00142, November 2009Copyright © 2009 BLADE Network Technologies, Inc., 2350 Mission College Blvd., Suite 600, Santa

BLADE OS 5.0 Command Reference20  Chapter 1: The Command Line Interface BMD00142, November 2009

BLADE OS 5.0 Command Reference200  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/port <port alias or number>/errdisPort Error

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  201/cfg/port <port alias or number>/gigPort Link Con

BLADE OS 5.0 Command Reference202  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/port <port alias or number>/aclqosPort ACL C

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  203/cfg/port <port alias or number>/stpPort Spanning

BLADE OS 5.0 Command Reference204  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/qosQuality of Service Configuration MenuUse the Qu

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  205/cfg/qos/8021p802.1p Configuration This feature provide

BLADE OS 5.0 Command Reference206  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/qos/dscpDSCP Configuration Use this menu map the D

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  207/cfg/aclAccess Control List Configuration MenuUse this

BLADE OS 5.0 Command Reference208  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/acl/acl <ACL number>ACL Configuration These

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  209/cfg/acl/acl <ACL number>/mirrorACL Mirroring Con

BMD00142, November 2009 21CHAPTER 2First-Time ConfigurationTo help with the initial process of configuring your switch, the BLADE OS software includes

BLADE OS 5.0 Command Reference210  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/acl/acl <ACL number>/ethernetEthernet Filter

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  211/cfg/acl/acl <ACL number>/ipv4IP version 4 Filter

BLADE OS 5.0 Command Reference212  Chapter 6: The Configuration Menu BMD00142, November 2009resetResets the IPv4 parameters for the ACL to their de

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  213/cfg/acl/acl <ACL number>/tcpudpTCP/UDP Filtering

BLADE OS 5.0 Command Reference214  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/acl/acl <ACL number>/meterACL Metering Confi

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  215/cfg/acl/acl <ACL number>/re-markRe-Mark Configur

BLADE OS 5.0 Command Reference216  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/acl/acl <ACL number>/re-mark/inprofRe-Markin

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  217/cfg/acl/acl <ACL number>/re-mark/up1pUpdate User

BLADE OS 5.0 Command Reference218  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/pmirrPort Mirroring Configuration Menu Port mirror

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  219/cfg/pmirr/monport <port alias or number>Port-Mir

BLADE OS 5.0 Command Reference22  Chapter 2: First-Time Configuration BMD00142, November 2009 Optional configuration of IP parameters IP address,

BLADE OS 5.0 Command Reference220  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2Layer 2 Configuration Menu[Layer 2 Menu] mrs

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  221lacpDisplays the Link Aggregation Control Protocol menu

BLADE OS 5.0 Command Reference222  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/mrstRSTP/MSTP Configuration BLADE OS supports t

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  223mode rstp|mstp|pvrstSelects the Spanning Tree mode, as

BLADE OS 5.0 Command Reference224  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/mrst/cistCommon Internal Spanning Tree Configur

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  225/cfg/l2/mrst/cist/brgCIST Bridge Configuration CIST bri

BLADE OS 5.0 Command Reference226  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/mrst/cist/port <port alias or number>CIST

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  227link [auto|p2p|shared]Defines the type of link connecte

BLADE OS 5.0 Command Reference228  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/stp <STP group index>Spanning Tree Config

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  229offGlobally disables Spanning Tree Protocol.defaultRest

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 2: First-Time Configuration  23Stopping and Restarting Setup ManuallyStopping SetupTo

BLADE OS 5.0 Command Reference230  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/stp <STP group number>/brgSpanning Tree B

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  231When configuring STG bridge parameters, the following f

BLADE OS 5.0 Command Reference232  Chapter 6: The Configuration Menu BMD00142, November 2009The port option of STG is turned on by default. Table

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  233/cfg/l2/fdbForwarding Database Configuration Use the fo

BLADE OS 5.0 Command Reference234  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/fdb/staticStatic FDB Configuration Use the foll

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  235/cfg/l2/trunk <trunk group number>Trunk Configura

BLADE OS 5.0 Command Reference236  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/thashIP Trunk Hash ConfigurationUse the followi

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  237/cfg/l2/thash/setIP Trunk Hash Trunk hash parameters ar

BLADE OS 5.0 Command Reference238  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/lacpLACP Configuration Use the following comman

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  239/cfg/l2/lacp/port <port alias or number>LACP Port

BLADE OS 5.0 Command Reference24  Chapter 2: First-Time Configuration BMD00142, November 20093. Enter the month of the current system date at the p

BLADE OS 5.0 Command Reference240  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/failovrLayer 2 Failover Configuration Use this

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  241/cfg/l2/failovr/trigger <1-8>Failover Trigger Con

BLADE OS 5.0 Command Reference242  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/failovr/trigger/mmonManual Monitor Configuratio

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  243/cfg/l2/failovr/trigger/mmon/monitorManual Monitor Port

BLADE OS 5.0 Command Reference244  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/failovr/trigger/mmon/controlManual Monitor Cont

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  245/cfg/l2/hotlinkHot Links Configuration Table 139 descri

BLADE OS 5.0 Command Reference246  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/hotlink/trigger <1-25>Hot Links Trigger C

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  247/cfg/l2/hotlink/trigger <1-25>/masterHot Links Tr

BLADE OS 5.0 Command Reference248  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l2/hotlink/trigger <1-25>/backupHot Links Tr

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  249/cfg/l2/vlan <VLAN number>VLAN ConfigurationThe c

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 2: First-Time Configuration  25Setup Part 2: Port ConfigurationNote – When configurin

BLADE OS 5.0 Command Reference250  Chapter 6: The Configuration Menu BMD00142, November 2009Note – All ports must belong to at least one VLAN. Any

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  251/cfg/l2/vlan/privlanPrivate VLAN Configuration Use this

BLADE OS 5.0 Command Reference252  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3Layer 3 Configuration Menu[Layer 3 Menu] if

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  253ripDisplays the Routing Interface Protocol menu. To vie

BLADE OS 5.0 Command Reference254  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/if <interface number>IP Interface Configu

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  255/cfg/l3/gw <gateway number>Default Gateway Config

BLADE OS 5.0 Command Reference256  Chapter 6: The Configuration Menu BMD00142, November 2009arp disable|enableEnables or disables Address Resolutio

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  257/cfg/l3/routeIPv4 Static Route Configuration Up to 128

BLADE OS 5.0 Command Reference258  Chapter 6: The Configuration Menu BMD00142, November 2009ecmphash [sip][dip][protocol][tcpl4][udpl4][sport][dpor

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  259/cfg/l3/arpARP Configuration Address Resolution Protoco

BLADE OS 5.0 Command Reference26  Chapter 2: First-Time Configuration BMD00142, November 20095. If configuring VLANs, enable or disable VLAN taggin

BLADE OS 5.0 Command Reference260  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/arp/staticARP Static Configuration Static ARP e

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  261/cfg/l3/frwdIP Forwarding Configuration[IP Forwarding M

BLADE OS 5.0 Command Reference262  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/nwf <1-256>Network Filter Configuration[I

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  263/cfg/l3/rmap <route map number>Routing Map Config

BLADE OS 5.0 Command Reference264  Chapter 6: The Configuration Menu BMD00142, November 2009type <value (1|2)>|noneAssigns the type of OSPF m

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  265/cfg/l3/rmap <route map number>/alist <access

BLADE OS 5.0 Command Reference266  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/rmap <route map number> /aspath <auton

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  267/cfg/l3/ripRouting Information Protocol ConfigurationTh

BLADE OS 5.0 Command Reference268  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/rip/if <interface number>Routing Informat

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  269trigg disable|enableEnables or disables Triggered Updat

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 2: First-Time Configuration  274. Configure Spanning Tree Group membership for the VL

BLADE OS 5.0 Command Reference270  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/rip/redist fixed|static|ospf|eospfRIP Route Red

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  271/cfg/l3/ospfOpen Shortest Path First Configuration[Open

BLADE OS 5.0 Command Reference272  Chapter 6: The Configuration Menu BMD00142, November 2009redist fixed|static|ripDisplays the OSPF Route Distribu

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  273/cfg/l3/ospf/aindex <area index>Area Index Config

BLADE OS 5.0 Command Reference274  Chapter 6: The Configuration Menu BMD00142, November 2009auth none|password|md5 none: No authentication require

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  275/cfg/l3/ospf/range <range number>OSPF Summary Ran

BLADE OS 5.0 Command Reference276  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/ospf/if <interface number>OSPF Interface

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  277trans <1-3600>Configures the transit delay in sec

BLADE OS 5.0 Command Reference278  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/ospf/virt <link number>OSPF Virtual Link

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  279mdkey <key ID (1-255)>|noneSets MD5 key ID for ea

BLADE OS 5.0 Command Reference28  Chapter 2: First-Time Configuration BMD00142, November 20092. For the specified IP interface, enter the IP addres

BLADE OS 5.0 Command Reference280  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/ospf/host <host number>OSPF Host Entry Co

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  281/cfg/l3/ospf/redist fixed|static|ripOSPF Route Redistri

BLADE OS 5.0 Command Reference282  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/ospf/md5key <key ID>OSPF MD5 Key Configur

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  283/cfg/l3/igmpIGMP Configuration Table 167 describes the

BLADE OS 5.0 Command Reference284  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/igmp/snoopIGMP Snooping ConfigurationIGMP Snoop

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  285robust <2-10>Configures the IGMP Robustness varia

BLADE OS 5.0 Command Reference286  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/igmp/snoop/igmpv3IGMP Version 3 Configuration T

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  287/cfg/l3/igmp/mrouterIGMP Static Multicast Router Config

BLADE OS 5.0 Command Reference288  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/igmp/igmpfltIGMP Filtering ConfigurationTable 1

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  289/cfg/l3/igmp/igmpflt/filter <filter number>IGMP F

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 2: First-Time Configuration  292. At the prompt, enter the IP address for the selecte

BLADE OS 5.0 Command Reference290  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/igmp/igmpflt/port <port number>IGMP Filte

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  291/cfg/l3/igmp/querier <VLAN number>IGMP Querier Co

BLADE OS 5.0 Command Reference292  Chapter 6: The Configuration Menu BMD00142, November 2009count <1-10>Configures the Startup Query Count, w

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  293/cfg/l3/dnsDomain Name System ConfigurationThe Domain N

BLADE OS 5.0 Command Reference294  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/bootpBootstrap Protocol Relay ConfigurationThe

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  295/cfg/l3/vrrpVRRP ConfigurationVirtual Router Redundancy

BLADE OS 5.0 Command Reference296  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/vrrp/vr <router number>Virtual Router Con

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  297Virtual routers are disabled by default. Table 178 V

BLADE OS 5.0 Command Reference298  Chapter 6: The Configuration Menu BMD00142, November 2009prio <1-254>Defines the election priority bias fo

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  299/cfg/l3/vrrp/vr <router number>/trackVirtual Rout

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Contents  3ContentsPreface  11Who Should Use This Book  11How This Book Is Organized 

BLADE OS 5.0 Command Reference30  Chapter 2: First-Time Configuration BMD00142, November 20092. When prompted, decide whether you wish to review th

BLADE OS 5.0 Command Reference300  Chapter 6: The Configuration Menu BMD00142, November 2009Some tracking criteria (vrs, ifs, and ports below) appl

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  301/cfg/l3/vrrp/groupVirtual Router Group ConfigurationThe

BLADE OS 5.0 Command Reference302  Chapter 6: The Configuration Menu BMD00142, November 2009prio <1-254>Defines the election priority bias fo

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  303/cfg/l3/vrrp/group/trackVirtual Router Group Priority T

BLADE OS 5.0 Command Reference304  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/l3/vrrp/if <interface number>VRRP Interface

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  305/cfg/l3/vrrp/trackVRRP Tracking ConfigurationThis menu

BLADE OS 5.0 Command Reference306  Chapter 6: The Configuration Menu BMD00142, November 2009/cfg/setupSetupThe setup program steps you through conf

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 6: The Configuration Menu  307/cfg/ptcfg <FTP/TFTP server> <filename>Savi

BLADE OS 5.0 Command Reference308  Chapter 6: The Configuration Menu BMD00142, November 2009

BMD00142, November 2009 309CHAPTER 7The Operations MenuThe Operations menu is generally used for commands that affect switch performance immediately,

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 2: First-Time Configuration  31Setting PasswordsIt is recommended that you change the

BLADE OS 5.0 Command Reference310  Chapter 7: The Operations Menu BMD00142, November 2009The commands of the Operations menu enable you to alter sw

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 7: The Operations Menu  311/oper/port <port alias or number>Operations-Level Po

BLADE OS 5.0 Command Reference312  Chapter 7: The Operations Menu BMD00142, November 2009/oper/vrrpOperations-Level VRRP Options/oper/sysSystem Ope

BMD00142, November 2009 313CHAPTER 8The Boot Options MenuTo use the Boot Options menu, you must be logged in to the switch as the administrator. The B

BLADE OS 5.0 Command Reference314  Chapter 8: The Boot Options Menu BMD00142, November 2009Updating the Switch Software ImageThe switch software im

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 8: The Boot Options Menu  3151. At the Boot Options# prompt, enter:2. Enter the name

BLADE OS 5.0 Command Reference316  Chapter 8: The Boot Options Menu BMD00142, November 2009The system informs you of which image is currently set t

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 8: The Boot Options Menu  317Selecting a Configuration BlockWhen you make configurati

BLADE OS 5.0 Command Reference318  Chapter 8: The Boot Options Menu BMD00142, November 2009Accessing the ISCLIThe default command-line interface fo

BMD00142, November 2009 319CHAPTER 9The Maintenance MenuThe Maintenance menu is used to manage dump information and forward database information. It a

BLADE OS 5.0 Command Reference32  Chapter 2: First-Time Configuration BMD00142, November 2009The System Menu is displayed. 4. From the System Menu,

BLADE OS 5.0 Command Reference320  Chapter 9: The Maintenance Menu BMD00142, November 2009Table 187 Maintenance Menu Options (/maint)Command Synt

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 9: The Maintenance Menu  321/maint/sysSystem MaintenanceThis menu is reserved for use

BLADE OS 5.0 Command Reference322  Chapter 9: The Maintenance Menu BMD00142, November 2009/maint/fdbForwarding Database MaintenanceThe Forwarding D

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 9: The Maintenance Menu  323/maint/debugDebuggingThe Miscellaneous Debug menu display

BLADE OS 5.0 Command Reference324  Chapter 9: The Maintenance Menu BMD00142, November 2009/maint/arpARP Cache MaintenanceNote – To display all ARP

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 9: The Maintenance Menu  325/maint/routeIP Route ManipulationNote – To display all ro

BLADE OS 5.0 Command Reference326  Chapter 9: The Maintenance Menu BMD00142, November 2009/maint/igmpIGMP MaintenanceTable 193 describes the IGMP M

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 9: The Maintenance Menu  327/maint/igmp/snoopIGMP Group MaintenanceTable 193 describe

BLADE OS 5.0 Command Reference328  Chapter 9: The Maintenance Menu BMD00142, November 2009/maint/igmp/mrouterIGMP Multicast Routers MaintenanceTabl

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 9: The Maintenance Menu  329/maint/uudmpUuencode Flash DumpUsing this command, dump i

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 2: First-Time Configuration  336. Enter the current administrator password at the pro

BLADE OS 5.0 Command Reference330  Chapter 9: The Maintenance Menu BMD00142, November 2009/maint/cldmpClearing Dump InformationTo clear dump inform

BMD00142, November 2009 331APPENDIX ABLADE OS Syslog MessagesThe following syntax is used when outputting syslog messages:<Time stamp><Log La

BLADE OS 5.0 Command Reference332  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009LOG_CRIT Log_WARNING Thread MessageSSH can't

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  333LOG_ALERT SYSTEM I2C device <ID> <descript

BLADE OS 5.0 Command Reference334  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009OSPF Neighbor Router ID <router ID>, Neighbor

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  335LOG_ERR VRRP VRRP : received incorrect IP addresses

BLADE OS 5.0 Command Reference336  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009LOG_NOTICE PORT_MIRR ERROR: Management port <port

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  337CONSOLE RADIUS: No configured RADIUS serverCONSOLE R

BLADE OS 5.0 Command Reference338  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009MGMT Authentication failed for backdoor. Telnet disa

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  339MGMT scp<username>(<user type>) login {o

BLADE OS 5.0 Command Reference34  Chapter 2: First-Time Configuration BMD00142, November 20095. Select the user password.6. Enter the current admin

BLADE OS 5.0 Command Reference340  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009SSH Failed login attempt via SSHSSH New config setSS

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  341SYSTEM Port <port> disabled due to reason code

BLADE OS 5.0 Command Reference342  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009LOG_INFO VLAN Default VLAN can not be deletedVRRP v

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  343MGMT boot kernel Firmware upload failed.MGMT boot ke

BLADE OS 5.0 Command Reference344  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009MGMT invalid image download completed. Now writing t

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Appendix A: BLADE OS Syslog Messages  345MGMT undefined downloaded {from host <hostname>

BLADE OS 5.0 Command Reference346  Appendix A: BLADE OS Syslog Messages BMD00142, November 2009

BMD00142, November 2009 347IndexSymbols/ command... 37[ ]...

BLADE OS 5.0 Command Reference348  Index BMD00142, November 2009command (help)... 37Command-Line Int

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Index  349Final Steps... 29first-time

BMD00142, November 2009 35CHAPTER 3Menu BasicsThe RackSwitch G8124 Command Line Interface (CLI) is used for viewing switch information and statistics.

BLADE OS 5.0 Command Reference350  Index BMD00142, November 2009link status... 44command...

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Index  351passwordadministrator account... 18default ...

BLADE OS 5.0 Command Reference352  Index BMD00142, November 2009setup facility... 19, 21IP configurat

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Index  353timeoutradius server... 166timeoutsidle

BLADE OS 5.0 Command Reference36  Chapter 3: Menu Basics BMD00142, November 2009Menu Summary Information MenuProvides sub-menus for displaying inf

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 3: Menu Basics  37Global CommandsSome basic commands are recognized throughout the me

BLADE OS 5.0 Command Reference38  Chapter 3: Menu Basics BMD00142, November 2009apply Apply pending configuration changes.save Write configuration

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 3: Menu Basics  39verbose n Sets the level of information displayed on the screen:0 =

BLADE OS 5.0 Command Reference4  Contents BMD00142, November 2009Chapter 3: Menu Basics  35The Main Menu  35Menu Summary  36Global Command

BLADE OS 5.0 Command Reference40  Chapter 3: Menu Basics BMD00142, November 2009Command Line History and EditingUsing the command line interface, y

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 3: Menu Basics  41Command Line Interface ShortcutsThe following shortcuts allow you t

BLADE OS 5.0 Command Reference42  Chapter 3: Menu Basics BMD00142, November 2009Command AbbreviationMost commands can be abbreviated by entering th

BMD00142, November 2009 43CHAPTER 4The Information MenuYou can view configuration information for the switch in both the user and administrator comman

BLADE OS 5.0 Command Reference44  Chapter 4: The Information Menu BMD00142, November 2009qosDisplays the Quality of Service (QoS) Information menu.

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  45transcvrDisplays the status of the port transceiver module

BLADE OS 5.0 Command Reference46  Chapter 4: The Information Menu BMD00142, November 2009/info/sysSystem Information MenuThe information provided b

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  47/info/sys/errdisError Disable and Recovery Information Thi

BLADE OS 5.0 Command Reference48  Chapter 4: The Information Menu BMD00142, November 2009 /info/sys/snmpv3SNMPv3 System InformationSNMP version 3 (

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  49/info/sys/snmpv3/usmSNMPv3 USM User Table InformationThe U

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Contents  5RSTP/MSTP Information  72Common Internal Spanning Tree Information  75Trunk

BLADE OS 5.0 Command Reference50  Chapter 4: The Information Menu BMD00142, November 2009/info/sys/snmpv3/viewSNMPv3 View Table InformationThe user

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  51/info/sys/snmpv3/accessSNMPv3 Access Table InformationThe

BLADE OS 5.0 Command Reference52  Chapter 4: The Information Menu BMD00142, November 2009/info/sys/snmpv3/groupSNMPv3 Group Table InformationA grou

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  53/info/sys/snmpv3/taddrSNMPv3 Target Address Table Informat

BLADE OS 5.0 Command Reference54  Chapter 4: The Information Menu BMD00142, November 2009/info/sys/snmpv3/tparamSNMPv3 Target Parameters Table Info

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  55/info/sys/snmpv3/dumpSNMPv3 Dump Information usmUser Table

BLADE OS 5.0 Command Reference56  Chapter 4: The Information Menu BMD00142, November 2009/info/sys/generalGeneral System InformationNote – The disp

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  57System information includes: System date and time Switch

BLADE OS 5.0 Command Reference58  Chapter 4: The Information Menu BMD00142, November 2009/info/sys/logShow Recent Syslog MessagesEach syslog messag

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  59/info/sys/userUser Status InformationThis command displays

BLADE OS 5.0 Command Reference6  Contents BMD00142, November 2009Ethernet Statistics  111Interface Statistics  114Interface Protocol Statisti

BLADE OS 5.0 Command Reference60  Chapter 4: The Information Menu BMD00142, November 2009/info/l2Layer 2 Information MenuThe information provided b

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  61stpDisplays Spanning Tree information, including the statu

BLADE OS 5.0 Command Reference62  Chapter 4: The Information Menu BMD00142, November 2009trunkWhen trunk groups are configured, you can view the st

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  63/info/l2/fdbFDB Information The forwarding database (FDB)

BLADE OS 5.0 Command Reference64  Chapter 4: The Information Menu BMD00142, November 2009/info/l2/fdb/dumpShow All FDB InformationAn address that i

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  65/info/l2/lacpLink Aggregation Control Protocol Information

BLADE OS 5.0 Command Reference66  Chapter 4: The Information Menu BMD00142, November 2009/info/l2/lacp/dumpShow All LACP InformationLACP dump inclu

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  67/info/l2/failovr/trigger <trigger number>Show Layer

BLADE OS 5.0 Command Reference68  Chapter 4: The Information Menu BMD00142, November 2009/info/l2/hotlinkHot Links Information /info/l2/hotlink/tri

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  69/info/l2/stpSpanning Tree InformationThe switch software u

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Contents  7System Host Log Configuration  162SSH Server Configuration  164RADIUS Serve

BLADE OS 5.0 Command Reference70  Chapter 4: The Information Menu BMD00142, November 2009When STP is used, in addition to seeing if STG is enabled

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  71Designated Bridge The Designated Bridge shows information

BLADE OS 5.0 Command Reference72  Chapter 4: The Information Menu BMD00142, November 2009/info/l2/stpRSTP/MSTP InformationThe switch software can b

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  73The following table describes the STP parameters in RSTP o

BLADE OS 5.0 Command Reference74  Chapter 4: The Information Menu BMD00142, November 2009Designated Bridge The Designated Bridge shows information

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  75/info/l2/cistCommon Internal Spanning Tree Information In

BLADE OS 5.0 Command Reference76  Chapter 4: The Information Menu BMD00142, November 2009Hello The hello time parameter specifies, in seconds, how

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  77/info/l2/trunkTrunk Group InformationWhen trunk groups are

BLADE OS 5.0 Command Reference78  Chapter 4: The Information Menu BMD00142, November 2009/info/l2/vlanVLAN Information This information display inc

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  79/info/l2/prvlanPrivate VLAN InformationPrivate VLAN inform

BLADE OS 5.0 Command Reference8  Contents BMD00142, November 2009ACL Metering Configuration  214Re-Mark Configuration  215Re-Marking In-Profi

BLADE OS 5.0 Command Reference80  Chapter 4: The Information Menu BMD00142, November 2009/info/l3Layer 3 Information MenuThe information provided b

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  81ecmpDisplays ECMP route information. For details, see page

BLADE OS 5.0 Command Reference82  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/routeIP Routing InformationUsing the commands lis

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  83/info/l3/route/dumpShow All IP Route InformationThe follow

BLADE OS 5.0 Command Reference84  Chapter 4: The Information Menu BMD00142, November 2009The following table describes the Tag parameters.Table 28

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  85/info/l3/arpARP Information The ARP information includes I

BLADE OS 5.0 Command Reference86  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/arp/addrARP Address List Information The Port fie

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  87/info/l3/ospfOSPF Information[OSPF Information Menu]

BLADE OS 5.0 Command Reference88  Chapter 4: The Information Menu BMD00142, November 2009nsumadd <area index (0-2)>Displays the list of summa

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  89/info/l3/ospf/generalOSPF General Information/info/l3/ospf

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Contents  9Network Filter Configuration  262Routing Map Configuration  263IP Access Lis

BLADE OS 5.0 Command Reference90  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/ospf/dbaseOSPF Database Information [OSPF Databas

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  91ext <adv-rtr (A.B.C.D)>|<link_state_id (A.B.C.D&g

BLADE OS 5.0 Command Reference92  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/ospf/routesOSPF Route Codes Information/info/l3/r

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  93/info/l3/rip/routesRIP Routes InformationThis table contai

BLADE OS 5.0 Command Reference94  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/ipIP Information IP information includes:  I

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  95/info/l3/igmpIGMP Multicast Group InformationTable 34 desc

BLADE OS 5.0 Command Reference96  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/igmp/querier <VLAN number>IGMP Querier Info

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  97/info/l3/igmp/mrouterIGMP Multicast Router Port Informatio

BLADE OS 5.0 Command Reference98  Chapter 4: The Information Menu BMD00142, November 2009/info/l3/igmp/dumpIGMP Group InformationIGMP Group informa

BLADE OS 5.0 Command ReferenceBMD00142, November 2009 Chapter 4: The Information Menu  99/info/l3/vrrpVRRP InformationVirtual Router Redundancy Pro